|
| |
 |
This is a "how to" section where I offer practical tips on setting up computers,
computer networks (wired and wireless) and peripherals. I will be including
pictures, suggestions, techniques and links to tools and supplies you might find
useful. The topics I discuss are things you can do to improve the performance
and reliability of your SOHO (small office, home office) or home computer or
computer network.
|
|
|
| |
| |
wiring tips
Always place wires (cables) that carry similar signals together. Phone lines
should be grouped separately from network cables. Separate electrical power cords
from phone and network cables (a couple of inches if possible). If cables carrying
different signal types must cross each other they should cross at as close to a
90 degree angle as possible. Grouping cables in this manner helps to limit
electrical interference between cables.
|
| |
|
Bundle similar cable types together with plastic "cable ties" or Velcro wraps.
When you group your wires/cables do not draw them together to tightly. Cut the
ends off the cable ties to create a neat looking easy to a handle bundle. I've
provided a couple of pictures below.
|
| |
|
| |
| |
|
| |
| |
|
Network cables used to connect your computer/s and peripherals must not be bent
sharply when routed/installed as this can damage them and or lead to data errors.
Manufacturers refer to the "bend radius" as the minimum radius a cable can be bent
without damaging and or increasing transmission errors. The "bend radius" will
vary by cable type and manufacturer.
|
| |
|
Solutions to manage your cables are available in the electrical departments
of most home centers or electronics part suppliers. Attention to detail when
installing new equipment can improve functionality, reduce troubleshooting and
maintenance time. It also looks a lot more professional!
|
| |
| |
|
|
If you have any comments on how I might improve this information please offer your
suggestions. Thanks, Tom
|
| |
|
|
